What should be recorded when a wire-fed joint changes?
Identify the current drawing and material or fit changes, then record filler-wire changes separately with any remaining setup questions.
Laser Welding Machine
VIW2000S — VIW-S Laser Welding Machine
VIW2000S welding application configuration should record changes to the joint and filler-wire requirements separately. A revised material or fit condition can change the inquiry even when the same power model is retained. Keep one current drawing and material record so the equipment proposal has a clear basis for repeated work.
VIW2000S is the 2000W, 1080nm model in the VIW-S handheld range. The series describes wheels, a movable structure, handheld head, generator and industrial water chiller. An automatic wire-feeding device supplies filler wire to the weld pool; the actual wire and proposed setup remain part of the application discussion.
Technical specifications
| Specification | VIW2000S |
|---|---|
| Laser Power | 2000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | Standard 10m, Maximum Support 20m |
| Cooling Method | Water Cooling |
| Support Language | English, Chinese, Japanese, Korean, Russian |
| Working Humidity | <70% No Condensation |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIW2000S joint project brief across wire and drawing revisions
The VIW2000S joint project brief should identify drawing revision, base materials and thicknesses, weld location and quantity. Record a specified wire separately, and mark unresolved choices. If a joint repeats in different assemblies, explain access or part-presentation differences rather than treating every occurrence as identical.
VIW3000S lists 3000W compared with VIW2000S at 2000W. This is a laser-power difference, not a stated gain in welding depth, feed rate or production output. Retain the current joint and wire requirements alongside the equipment comparison.
The VIW-S controls are described as supporting parameter setting and monitoring, including power, speed and focus adjustment, with wire-feed settings also listed. These functions do not establish numeric feed limits or an automatically valid procedure after the material, wire or drawing changes.
VIW2000S equipment options for the current feed requirement
VIW2000S equipment options should be compared against the current application revision. If only the weld location changed, preserve the material and wire records and identify the new drawing. If a filler-wire requirement changed too, record that explicitly rather than assuming a previous response covers it.
Ask the proposal to identify the actual wire-feeding configuration and included items. The automatic-feed description does not establish a particular wire diameter, a feed-speed range or multiple-wire capability. Keep unanswered wire and setup questions separate from the fact that the series includes a feeding device.
The fiber specification is standard 10m with maximum support of 20m. Describe revised work positions and confirm the supplied length. The maximum-supported entry is not a default inclusion or proof of access to every revised assembly or fixture arrangement.
VIW2000S quotation requirements for revised equipment
VIW2000S quotation requirements should name the selected Raycus, JPT, IPG or Max source, supplied fiber and water-cooled configuration. Ask the head, chiller and wire-feeding items to be listed against the current requirements. Distinguish equipment changes from changes in the drawing or requested filler wire.
Listed interface languages are English, Chinese, Japanese, Korean and Russian. Working Humidity is below 70% with no condensation. Provide the destination and request current setup and installation information. These table entries should not be broadened into a service or training commitment.
Consolidate the current drawing, material and wire records, selected equipment and open fixture questions before comparing offers. The linked series and next power model provide published references. Send the contact page the complete revision record so the proposed package answers the requirements now intended.
Product questions
Does automatic feeding establish a numeric feed rate?
The description establishes a device feeding filler wire. It does not supply a universal rate, wire-diameter range or multiple-wire capability.
Does the 3000W model prove greater joint strength?
The comparison provides power ratings. Joint strength, penetration and production output do not follow from the nominal rating alone.
How should the fiber requirement be confirmed?
Describe the work arrangement and confirm the supplied length. The published entry is standard 10m with maximum support 20m.
What should a revised offer distinguish?
Separate source, fiber and feeding-device package changes from changes to drawings and wire requirements, retaining unresolved fixture and installation questions.
Related equipment and information
Compare VIW-S Laser Welding Machine models
Ready to discuss VIW2000S?
Share your material, dimensions and process. Start a conversation about the right configuration.